40’/45′ Extendable Tandem
Overall Length: 40’-11” retracted or 45’-11” extended
Overall Width: 96”
Overall Height: 58”
Fifth Wheel Height: 48 ± 1”
Rear Deck Height: 48 ± 1”
Kingpin Location: 30” (From rear face of front bolster)
Landing Gear Location: 100” (From the kingpin center)
Tandem Location: 54” (From rear face of rear bolster)
Axle Spread: 49”
Tare Weight: (7,300 lbs)±3%
Payload: 67,200 lbs (30,480kgs
Color on request
Specifications
Warranty Policy
| Main beam | POSCO (Vietnam) W12@19lb/ft hot-rolled H-beam, ASTM A572 Grade 50 or equivalent. |
| Cross member | 3/16” thick x 3” wide x 9” deep channel with profiled bar type diagonal brace. Local supplier (Vietnam). |
| Upper Coupler | 1/4” pick up plate with JOST (USA) 2” diameter square type king pin per SAE standard, 380-420 HB, with 2” water drain holes, design to be integrated with main frame through welding. |
| Front Bolster | 8” wide x 10” high x 1/4” thick open section, with 3-1/2” chamfer in full length for gathering container in operation. 7-way receptacle and glad hands are in the center of front bolster. Cast corner caps. Local supplier (Vietnam). |
| Front Locking pin | BUFFERS (India). |
| Center twist Lock | SCHULZ (Spain). |
| Rear Bolster | 8” wide x 3/8” thick top plate with 7” wide x 6-5/8” deep x 1/4” thick “U” type bottom channel. Local supplier (Vietnam). |
| Rear twist Lock | BUFFERS (India). |
| Rear Bumper | 4” x 4” square tube step with taper “H” section vertical member. Bar is welded to uprights and main beam. Local supplier (Vietnam). |
| Extension Beam | 7-5/8” deep fabricated I-beam with 5-1/2”x3/8” flanges and 1/4” thick web. Easily operated self-locating and self-locking spring loaded pin mechanism is used to lock the frame. Local supplier (Vietnam). |
| Landing Gear | SAF-HOLLAND (USA) ATLAS65 with 65,000 lbs capacity, 2-speed 17” travel with low “T” shoes. Crank handle is located on the driver’s side of the chassis. Pre-painted BLACK color. Landing gear brackets are welded on the main beam as the layout. |
| Suspension | HUTCH (USA) H9700 mechanical tandem suspension, overslung configuration with CASC (Vietnam) high-arch 3-leaf spring (354-00). Pre-painted BLACK color. |
| Axles | YORK (India) 5” round axles with 22500lb capacity; 71.5” track, 16.5”X7” 4515Q brake. Dust shields are provided. Pre-painted BLACK color.
1.5-28 spline, HALDEX (India) 5.5” automatic slack adjusters. Reserved PSI interface; Heat Sensing Labels. Axle Installation orientation: 270 degrees FRONT, chambers UP (1 abs ready front, 1 non abs rear per unit). |
| Wheel end | YORK (India) Hub & Drum Assembly. STEMCO (USA) 340-4370 solid Aluminum Hub Cap. SKF (USA) seals P/N Scotseal plus XL 46300. ORBIT TN (India) bearings. Spindle nut: YORK (India) Double Nut. (5-year warranty wheelend). |
| Lubricant | MOBILITH SHC 007 (India) Synthetic Semi-fluid grease lubricant. |
| Wheels | ALCOA (Hungary) 22.5 x 8.25 10-stud hub-piloted Aluminum wheels. |
| Tires | WESTLAKE (Thailand) 11R22.5-14PR tubeless type. |
| Brake System | SEALCO (USA) 110800 spring brake priority valve system and WABCO (Thailand/ USA/ Germany/ Poland) 2S/1M ABS system. PHILLIPS (Vietnam) glad hand 12-0061 and 12-0081. TECTRAN (USA) 3/8” blue air tube for control and 3/8” red for supply. HALDEX (Mexico) Goldseal T30/30, 2.5” stroke brake chamber. TCMC (Vietnam) air tank (Pre-painted BLACK color). |
| Electrical Receptacle | PHILLIPS (Mexico) 16-724 plastic material with split pins. |
| Document Holder | TCMC (Vietnam). Installed on roadside near crank handle. |
| Conspicuity tape | “3M” (Singapore) brand. Installed per federal regulations. |
| Painting | Abrasive blast of all metal surfaces – not less than SA-2.5 to achieve clean bare steel. Surface will be coated with electrophoresis primer and powder topcoat. Color BLACK RAL9005 and at the corner painted YELLOW color. Total thickness not less than 80μm after dry membrane. Coating supplier: PPG (Vietnam) (7-year warranty). |
| Marking | Standard configuration (includes Thaco Trailers Decal, layout, VIN, nameplate). Local supplier (Vietnam). |
| Painting | Abrasive blast of all metal surfaces – not less than SA-2.5 to achieve clean bare steel. Surface will be coated with electrophoresis primer and powder topcoat. Total thickness not less than 80μm after dry membrane. Coating supplier: (7-year warranty). |
| Hubodometer | STEMCO (USA). |
| Tire Inflation System | PSI (USA) Tire Inflation System with THERMalert. |
| Mud flaps | TPC (Vietnam) 24”x30”x1/4” White PVC mud flaps without “CUSTOMER” logo. |
| No. | Part Name | Manufacturers Name | Time | Warranty Information |
| 1 | Frame | Thaco Trailers | 5 Years | THACO INDUSTRIES TRAILERS AND HEAVY STEEL STRUCTURES MANUFACTURING LIMITED LIABILITY COMPANY Add : Chu Lai IZ., Nui Thanh Town, Quang Nam province, Vietnam Office: (+84) 2353.565.327 Website: https://thacotrailers.com/ |
| 2 | Paint(ED + Top coat) | PPG | Painting: 7 Years |
Other Products
40’ Gooseneck Tandem
40′ Gooseneck Light Weight Tandem
40′ Gooseneck Tridem
20’/40′ City Combo Tandem
40’/45’/48’/53’ Slider Tridem
20’/40’/45’ City Combo Tridem Without Genset
20’/40’/45’ City Combo Tridem With Genset
20’/40′ Combo Tandem
20’/40′ Combo Tridem
