THACOTRAILERS

20’/40’/45’ City Combo Tridem With Genset

Overall Length: 38’ 1” retracted or 45’ 11” extended

Overall Width: 96” (over tire 102”)

Fifth Wheel Height: 47 ± 1”

Max Rear Height 48 ± 1”

Kingpin Location: 24” (From rear face of front bolster)

Landing gear Location: 94.5” (From centerline of kingpin)

Axle Spread: 61” + 61”

Tridem Location: 25 7/8” (From rear face of rear bolster)

Tare Weight: 10,000 lbs ± 2%

Payload: 49,400 lbs in 20’ position; 67,200 lbs in 40’ or 45’ position

  • Specifications

  • Warranty Policy

Front Main beam Fabricated I-beam with high strength Grade 80 steel 4” x 1/2” top flange and 4” x 25/32” bottom flange with 3/8” web.
Cross member Fabricated 3/16” thick channel with profiled bar type diagonal brace.
Upper Coupler 5/16” pick up plate with JOST 2” diameter square type king pin per SAE standard, 380-420 HB, with 2” water drain holes, design to be integrated with main frame through welding.
Front Bolster 8” wide x 10” high x 1/4” thick open section, with 3 1/2” chamfer in full length for gathering container in operation. 7-way receptacle and glad hands are located in the center of front bolster. Casted corner caps (TOCA 905-940-000-RS/CS).
Front Locking pin TOCA 905-910-000-LH/RH
Rear Bolster 8” wide x 3/8” thick top plate with 6 7/8” wide x 8” deep x 1/4” thick “U” type bottom channel.
Rear twist Lock TOCA 905-130-000-90-LH/RH
Rear Bumper 4” x 4” square tube step with taper “H” section vertical member with 4” wide x 3/8” thick steel flange and 1/4” thick web. Bar is welded to uprights and main beam
Extension Beam Fabricated 7 5/8” tall x 5 1/4” wide I-beam with high strength Grade 100 steel flanges.
Locking system Air operated locking pins, Activated by 24/24 spring brakes on both sides of the trailer through third glad hand on front sill.
Landing Gear Air operated locking pins, activated by 30/30 spring brakes on both sides of the trailer through third gladhand on front sill.
Suspension AXN OS 61” tri-axle, overslung configuration with high-arch 3-leaf spring (354-00). Pre-painted BLACK RAL9005 color.
Axles AXN 5” round axles with 22,500lb capacity; 77.5” track, Q+ 16.5”X7” 4707Q brake with AXN R23 linings. Dust shields are provided. Pre-painted BLACK RAL9005 color. 1.5-28 spline, HALDEX 5.5” automatic slack adjusters with stroke indicators. Reserved PSI interface; Heat Sensing Labels. Axle Installation orientation: 90 degrees rear, Chambers DOWN (2 abs ready front and rear, 1 non abs mid per unit).
Wheel end “AXN Hub & Drum Assembly P/N H30-0647BFNTZ/H30-0647BFNZ, STEMCO 358-4009 Integrated Sentinel Grease Hub Cap, STEMCO seals and bearings. Spindle nut: STEMCO Pro-Torq P/N 447-4743. (5-year warranty wheelend). “
Lubricant Petro Canada precision synthetic EP 00 semi fluid grease lubricant.
Wheels SUNRISE (Vietnam) 22.5 x 8.25 10-stud hub-piloted wheels with 5 hand holes and with TR572 valve stem. Pre-painted white color.
Tires SAILUN (Vietnam) 11R22.5-16PR tubeless type, S665 tread without owner’s logo.
Brake System SEALCO 110800 spring brake priority valve system, SEALCO 110580 control line valve and WABCO 4S/2M ABS system.

PHILLIPS glad hand 12-13807 and 12-13607.

TECTRAN 3/8” blue air tube for control and 1/2” red for supply.

HALDEX Goldseal T30/30, 2.5” stroke brake chamber.

FUWA air tanks

Electrical GROTE mold seal wiring harness, Reserved PSI and GPS connector. GROTE LED lights (amp connections for S/T/T lights and .180 bullets for others). The theft proof design used for 4” LED lighting.
Electrical Receptacle GROTE die cast nose box with solid pins.
Document Holder PHILLIPS 16-802. Installed on roadside near crank handle.
Conspicuity tape “AVERY” brand. Installed per federal regulations.
Painting Abrasive blast of all metal surfaces – not less than SA-2.5 to achieve clean bare steel.

Surface will be coated with electrophoresis primer and powder topcoat.

Color BLACK RAL9005 and at the corner painted YELLOW color.

Total thickness not less than 80μm after dry membrane.

Coating supplier: Local supplier (Vietnam).

Marking Standard configuration (includes Thaco Trailers Decal, layout, VIN, nameplate). Local supplier (Vietnam).
Hubodometer NONE.
Tire Inflation System NONE.
Mud flaps 30”x24”x1/4” Black PVC mud flaps with “customer” logo and address

No. Part Name Manufacturers Name Time Warranty Information
1 Frame Thaco Trailers  5 Years THACO INDUSTRIES TRAILERS AND HEAVY STEEL STRUCTURES MANUFACTURING LIMITED LIABILITY COMPANY
Add : Chu Lai IZ., Nui Thanh Town, Quang Nam province, Vietnam
Office: (+84) 2353.565.327
Website: https://thacotrailers.com/
2 Paint(ED + Top coat) PPG Painting: 7 Years

Other Products

Dump semi-trailer 23,5m3 (3FG0930C)

Dump semi-trailer 23,5m3 (3FG0930A)

Dump semi-trailer 25m3 (3FG0930)

40’ Gooseneck Tandem

40′ Gooseneck Light Weight Tandem

40′ Gooseneck Tridem

20’/40′ City Combo Tandem

40’/45′ Extendable Tandem

40’/45’/48’/53’ Slider Tridem