20’/40’/45’ City Combo Tridem Without Genset
Overall Length: 34’-7 1/4” (retracted) or 45’-8” (extended)
Overall Width: 96” (over tire 102”)
Fifth Wheel Height: 48 ± 1”
Rear Deck Height: 49.8 ± 1”
Kingpin Location: 17.5” (From the rear of the front bolster)
Landing Gear Location: 106-1/2” (From the kingpin center)
Tridem location: 30” (From rear face of rear bolster to rear axle center when extended)
Axle Spread: 61” + 61”
Tare Weight: 11,400 lbs ± 2%
Payload: 65,100lbs for 20’ loaded or 73,100lbs for 40’ or 45’ loaded
Specifications
Warranty Policy
| Main beam | 16″x5” fabricated I-beam with high strength flanges and 6-11/32” height for gooseneck rail. |
| Upper Coupler | 5/16” pick up plate with JOST 2” diameter square type kingpin per SAE standard, 380-420 HB, with 2” water drain holes, design to be integrated with main frame through welding. |
| Front Bolster | Fabricated bolster assembly with high strength plates with 89” centers, equipped with none retractable twist locks. 7-way receptacle and glad hands are in the center of front bolster. |
| Front Locking pin | TOCA 905-910-000-LH/RH |
| Rear Bolster | Tapered rectangle bolster of the main frame fabricated by 3/8” thick top and bottom plate with 5/16” thick side plates. 6-5/8” height x 4” wide fabricated box beam bolster on slider composed by 1/2” thick top/bottom plates with 5/16” thick side plates with flip up twistlocks. |
| Rear twist Lock | TOCA 905-130-000-90-LH/RH |
| Slider Beam | Fabricated I beam with 3/4″x5” upper and lower flanges and 3/16” web, slider extends or retract on 6” diameter steel rollers. |
| Locking system | Air operated locking pins, activated by 30/30 spring brakes on both sides of the trailer through third gladhand on front sill. |
| Landing Gear | AXN FW32E00J with 60,000 lbs capacity, 2-speed 17” travel with low “T” shoes. Crank handle is located on the driver’s side of the chassis. Pre-painted BLACK RAL9005 color. Landing gear brackets are bolted on the main beam as the layout. |
| Suspension | AXN US 61″ tri-axle, underslung configuration with high-arch single spring (360-00). Pre-painted BLACK RAL9005 color. |
| Axles | AXN 5” round axles with 22,500lb capacity; 77.5” track; Q+ 16.5”X7” 4707Q brake with AXN R23 linings. Dust shields are provided. Pre-painted BLACK RAL9005 color. 1.5-28 spline, HALDEX 5.5” automatic slack adjusters with stroke indicators. Reserved PSI interface; Heat Sensing Labels. Axle Installation orientation: 90 degrees REAR, chambers DOWN (2 abs ready front and rear, 1 non abs mid per unit). |
| Wheel end | AXN Hub & Drum Assembly P/N H30-0647BFNTZ/H30-0647BFNZ. STEMCO 358-4009 Integrated Sentinel Hub Cap. STEMCO seals and bearings. Spindle nut: STEMCO Pro-Torq P/N 447-4743. (5-year warranty wheelend). |
| Lubricant | Petro Canada precision synthetic EP 00 semi fluid grease lubricant. |
| Brake System | SEALCO 110800 spring brake priority valve system and WABCO 4S/2M ABS system. PHILLIPS glad hand 12-13807 and 12-13607, 3/8” blue air tube for control and 3/8” red for supply. HALDEX Goldseal T30/30, 2.5” stroke brake chamber. FUWA air tanks. |
| Wheels | SUNRISE 22.5 x 8.25 10-stud hub-piloted wheels with 5 hand holes and with TR572 valve stem. Pre-painted white color. |
| Tires | SAILUN 11R22.5-16PR tubeless type, S665 tread without owner’s logo. |
| Brake System | SEALCO 110800 spring brake priority valve system and WABCO 4S/2M ABS system. PHILLIPS glad hand 12-0061 and 12-0081, 3/8” blue air tube for control and 3/8” red for supply. HALDEX Goldseal T30/30, 2.5” stroke brake chamber. FUWA air tanks. |
| Electrical | GROTE mold seal wiring harness, Reserved PSI and GPS connector. GROTE LED lights (amp connections for S/T/T lights and .180 bullets for others). The theft proof design used for 4” LED lighting. |
| Electrical Receptacle | GROTE die cast nose box with solid pins. |
| Document Holder | PHILLIPS 16-802. Installed on roadside near crank handle. |
| Conspicuity tape | “AVERY” brand. Installed per federal regulations. |
| Painting | Abrasive blast of all metal surfaces – not less than SA-2.5 to achieve clean bare steel. Surface will be coated with electrophoresis primer and powder topcoat. Color BLACK RAL9005 and at the corner painted YELLOW color. Total thickness not less than 80μm after dry membrane. Coating supplier: Local supplier. |
| Marking | Standard configuration (includes Thaco Trailers Decal, layout, VIN, nameplate). Local supplier (Vietnam). |
| Hubodometer | NONE. |
| Tire Inflation System | NONE. |
| Mud flaps | 30″x24″x0.25″ (762x610x6.0mm), BLACK PVC mud flaps with “customer” logo and address. |
| No. | Part Name | Manufacturers Name | Time | Warranty Information |
| 1 | Frame | Thaco Trailers | 5 Years | THACO INDUSTRIES TRAILERS AND HEAVY STEEL STRUCTURES MANUFACTURING LIMITED LIABILITY COMPANY Add : Chu Lai IZ., Nui Thanh Town, Quang Nam province, Vietnam Office: (+84) 2353.565.327 Website: https://thacotrailers.com/ |
| 2 | Paint(ED + Top coat) | PPG | Painting: 7 Years |
Other Products
40’ Gooseneck Tandem
40′ Gooseneck Light Weight Tandem
40′ Gooseneck Tridem
20’/40′ City Combo Tandem
40’/45′ Extendable Tandem
40’/45’/48’/53’ Slider Tridem
20’/40’/45’ City Combo Tridem With Genset
20’/40′ Combo Tandem
20’/40′ Combo Tridem
